Cinch/RCA twin cable 6mWith the practical CFU CC twin cable, Cordial offers a solution for making interference-free unbalanced connections via cinch. The colour coding (red/black) makes it easy to identify both channels, regardless of whether it's a synthesiser, keyboard...

With its 1x 3.5 mm stereo jack plug to 2x 3.5 mm stereo jack sockets the CFY WYY presents a clean, high quality solution to connect 2 headphones to one source. The cross section of this Y-cable is 2x 0.22mm², resulting in a clean signal transmission combined with good stability an...

3.5 mm stereo jack to 2x 6.3 mm mono jack Y-adapterThis Y-splitter is used to connect a mobile phone or laptop to a mixing device, a sampler unit or an audio interface. The stereo signal is split into two mono channels so that they can be mixed separately. Both channels are colour-coded....

The CFY VPP Y adapter cable with 1x 6.3 mm stereo jack plug to 2x 6.3 mm mono plug is a very popular tool, for example, for transmitting a signal from a mixing console to a keyboard. The split at both ends is about 15 cm long and the individual ends are clearly marked in red and black....

The CPD FM is a 110 ohms 3-pin DMX cable. The cable cross section of the CDMX 234 bulk cable is 2x 0.34 mm². The CPD FM digital cable has been designed for optimum stage operations, regarding both the solid and flexible nature of the bulk cable and the...

Loudspeaker Cable 1.5 mm² The speaker cable CLS 215 FRNC doesn’t contain any halogens so that - in case of a fire - no toxic fumes will be emitted. This is especially important as regards permanent insta...

The studio microphone cableThe high-end studio-microphone cable CSM FM Gold 250 comes with all the relevant features for demanding voice recordings. The bulk cable CMK 250 with a particularly large copper diameter of 0.5 mm² results in an extremely low attenuation, which is ...

The noticeable recess grip design enhances the recall value of the CCFI cable. The special plug design provides increased tensile strength. The multi-purpose bulk cable also features state-of-the-art conductive plastic technology.

Generally speaking, the CPM FW-UNB is very much alike the CPM FW-BAL, but feature unbalanced connectors. A small but mighty tool, often used for the connection between mic and soundcard.

The digital interface CFD DVT is used for the balanced signal transmission from D-Sub to plug. Its pin configuration conforms with the analog Tascam DSUB  25 specifications (DA 88). The D-Sub 25-pin male connectors features a metal housing, the 8x 6.3mm plugs (balanced) are encased in nic...

The studio microphone cableThe high-end studio-microphone cable CSM FM Gold 250 comes with all the relevant features for demanding voice recordings. The bulk cable CMK 250 with a particularly large copper diameter of 0.5 mm² results in an extremely low attenuation, which is ...

Unbalanced microphone cable The CPM FW-UNB is very much alike the CPM FW-BAL, but both connectors are unbalanced soldered (ground and minus are bridged). It's mainly used to connect a microphone directly to your computer.

Loudspeaker Cable 4 mm²The speaker cable CLS 240 FRNC represents CORDIAL’s reaction to the growing tendency to use only flame-retardant and low-smoke cables for installations. Our FRNC/LSNH installation cable is based on the highly flexible CLS 240 speaker cable

The CPM MV, featuring an XLR male and a balanced jack plug is mostly used for mic and line signals and is extremely consistent and reliable. It can be used as a connection between active speaker and mixing desk. Cordial's bulk cable CMK 222 in combination with robust NEUTRIK connectors...

Twin cable xlr male to cinch/RCAWith the practical CFU MC twin cable, Cordial offers the solution for making interference-free unbalanced connections. The colour coding (red/black) makes it easy to identify both channels, regardless of whether it's a synthesiser, keyboard, turntables, dr...

Robust instrument cable with right angled silentPLUG®Cordial's legendary CRI PP instrument cable is also available with a right angle NEUTRIK® silentPLUG®. The connector version with an angle of 90 degrees is fitting closely to the guitar or bass and enables noiseless pluggin...

The CII PP is not only sturdy and durable but can especially boast of excellent winding properties. Very much liked by musicians that request a pure sound as well as easy handling.

The CPM MV, featuring an XLR male and a balanced jack plug is mostly used for mic and line signals and is extremely consistent and reliable. It can be used as a connection between active speaker and mixing desk. Cordial's bulk cable CMK 222 in combination with robust NEUTRIK connectors...

CPM FM This mic cable is a professional balanced connection between mic and stage box or mixing console and features black NEUTRIK® connectors. The conductor size of 0.22 mm² guarantees a dynamic sound. Extremely good value for the money! Transparent s...

If you require a multicore cable D-Sub 25 pin male to XLR 3-pin female which is compatible with the analog Tascam DSUB25 specification (DA 88) you should turn to our CFD DFT cable. The metal housing of the connectors is nickel-plated. The corresponding bulk cable is the CMD 8, which tr...