The 12W700 meets the specific market requirement for a loudspeaker which combines the excellent linearity, good efficiency and high power handling of the 15W700 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex an...

LF Ferrite Driver 8 Ohm99 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 450 W AES power handling Weather protected cone and plates for outdoor usage Excellent transient response Improved heat dissipation via uniq...

Eminence PX 23K5Designed to work in high-power cabinets, px crossovers are technically superior passive filters available as board-only or complete with fitted hardware for a smart, economical 'factory-fit' finish. Designed and built for Eminence, px crossovers feature

Description The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave f...

The 1530 is a high performance bass and mid range driver. It has a large magnet, resulting in a high Bl product, with high sensitivity and power handling.

2,200Hz recommended min. crossover freq (12dB/oct)Single piece PETP diaphragm and surround

JB250: Speaker grill 25cm (10”)Solid black metal grill

Speaker grill 46cm/18"

Professional Titanium driver with 34mm Kapton voice coil

18” Ferrite Chassis Driver

The 15MB650 high output mid bass has been designed for use as a bass and low-midrange driver in tuned reflex enclosures, in 2- or 3-way systems. When used in a 2-way system, we recommend a 1" or 2" exit compression driver to obtain the best sound quality and directional control. The 15MB650 co...

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

15-inch pressed steel chassis, ferrite magnet bass/mid driver

The 6ND410 is a very high output, state-of-the-art midrange product for high quality professional use. The high level of sound quality has been achieved thanks to extensive research by Eighteen Sound engineers which focused on implementing mid frequencies intelligibility. The 6ND410 can be use...

15/223B-8 (equivalent) Woofer Neodymium Speaker 15” Inch 38 Cm 800W 8 Ohm

1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coi

Best performance to price 1.4” exit driver on themarket 108 dB 1W/ 1maverage sensitivity 1.4 inch throat exit 2.4 inch edgewound aluminumvoice coil 140Wprogrampower handling Pure Titaniumdiaphragmassembly Proprietary phase plug design HFcoppersleeve forreduced distortion and increased ou...

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

T5510 - Celestion 1.75" PEPT Replacement DiaphragmFits CDX1-1731, CDX1-1745, CDX1-1746 and others - 8 OHM. Also fits Harbinger HP series cabinets. Direct replacement for QSC K8, K10, K12, KW122, KW152 and KW153. Direct replacement for Turbosound TS-55T120C8 for IQ10, IQ1...

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...