1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coi

Designed to work in high-power cabinets, px crossovers are technically superior passive filters available as board-only or complete with fitted hardware for a smart, economical 'factory-fit' finish. Designed and built for Eminence, px crossovers feature

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

12" mid/bass driver with extended low frequency response   Frequency Response and Impedance Curves

The XD110 is a HF unit suitable for compact size two and three way lightweight systems. XD110 with its Elliptical Constant Directivity Horn is designed for linear and extended response over a wide frequency range (1.5kHz to 18kHz). The phenolic diaphragm assembly with its 1 inch voice coil is ...

The 12W700 meets the specific market requirement for a loudspeaker which combines the excellent linearity, good efficiency and high power handling of the 15W700 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex an...

2,200Hz recommended min. crossover freq (12dB/oct)Single piece PETP diaphragm and surround

The HD125 1 inch exit HF unit has been designed as the natural evolution of the industry standard HD120 compression driver. It delivers an unmatched combination of extended linear frequency response and very high efficiency.

MEGA AKCIJA !!! OGRANICENE KOLICINE DOK TRAJE LAGER SAMO ! The 12W500 is a 500W program low frequency driver designed to satisfy the need for a 12" loudspeaker which combines excellent linearity with good sensitivity and power handling characteristics. It is primarily intended for compact bass...

Professional Titanium driver with 34mm Kapton voice coil

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...

Strong black metal speaker grill.12” (30cm)

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

12" Bass and mid-range driver providing 97dB sensitivity and 250Wrms    Frequency Response and Impedance Curves

The 18W2001 is the updated version of the classic 18W2000, a low frequency subwoofer which sets a benchmark in 18" (460 mm) high output transducers. Showing 20% higher power handling and 10% lower weight, it represents a significative development of the acclaimed 18W1000 model. The 18W2001 can...

The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact...

Increased chassis diameter for compatibility with popular portable two-way reinforcement systems

The 15MB650 high output mid bass has been designed for use as a bass and low-midrange driver in tuned reflex enclosures, in 2- or 3-way systems. When used in a 2-way system, we recommend a 1" or 2" exit compression driver to obtain the best sound quality and directional control. The 15MB650 co...