Type : Table type Polar pattern : Uni-directional Frequency range : 80 Hz - 12 kHz Sensitivity : -70 dB @ 1 kHz Rated output impedance : 600 Ohm Switch : Toggle switch; Talk - OFF - Continuous Talk Cable type : 2 core + 2 core screened Cable length : 3 m Connector ...

TG D71Condenser Drum Microphone (Half-Cardioid)Extremely rugged housing in a compact, slim designOptimal for Bass drum, Cajon or piano with a non-slip rubber bottomHalf-cardioid polar pattern for maximum gain before feedbackPowerful, natural soundMade in Ger...

Premium quality standard 19' rack caseDepth = 520mm (usable depth = 470mm)Strong 9mm plywood constructionRemovable front + back lidsPreassembled elements for easy build upALU 19' sliding rack rails on front and backAll washers + nuts + screws includedPerfect shock protection2 Recessed flip han...

The 15W930 low frequency transducer meets the specific market demand for a ceramic version of our industry standard 15ND930 extended low frequency transducer with 75 mm Ø copper edge wound voice coil. Thanks to its versatility, the 15W930 can be used in 2-way compact reflex enclosures w...

CMSUB8 BUILD-IN SUBWOOFERThe APart CMSUB8 stereo ceiling subwoofer is designed to reproduce a fat and deep bass. Featuring dual 8 ohms coils and incorporated passive filter circuitry, the CMSUB8 can be used in almost any situation where extra bass is needed at low to medium sound levels. This ...

Stereo pre-amplifier/mixer with 2 stereo volume zones  

The SUBline series has been completely redesigned and consists of 112SA, 115SA, 118SA, 218SA active and 118S and 218S passive subwoofer models, all bass-reflex , built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.

REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or @ 4 ohms), but the unit is also bridgeable to 2 x 240 watts @ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class D output t...

DESCRIPTIONEconomical stand made of steel, perfect for DJ-applicationsWinch with automatic brakeTV Certified & GS-approved !TECHNICAL INFORMATIONMax. Height: 2,70mMin. Height: 1,85mDiameter bottom: 1,10mTop section: 35mmMax. load: 65kgWeight: 11kg  ...

Speaker socket BOX 100A high quality mounting bracketweight – 0,3kgmaterial – steelpipe diameter – 35mm

Premium quality standard 19' rack caseDepth = 450mm (usable depth = 400mm)Strong 9mm plywood constructionRemovable front + back lidsALU 19' sliding rack rails on front and backAll washers + nuts + screws includedPerfect shock protection2 Recessed flip handles4 Butterfly catchesExt. dimensions: 52...

The CL-6 is a 2-way passive full range ceiling loudspeaker incorporating a 6.5” cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The system´s low frequency driver is mounted on a plastic support with mounting tab...

The PDB passive direct box from ART is a roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows for connectio...

DESCRIPTIONPremium quality standard 19' rack caseDepth = 410mm (usable depth = 360mm)Strong 9mm plywood constructionRemovable front + back lidsALU 19' sliding rack rails on front and backAll washers + nuts + screws includedPerfect shock protectio...

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

JB Systems XLR Light Standard Lighting for discos with XLR connection.

Rugged gooseneck microphone The JB30 is a rugged gooseneck microphone, for all kinds of applications: Conferences, meetings, PA installations, Teachers... The 30cm long gooseneck can be bended in all directions. The on/off switch in the base of the micropho...