Clip-on lavalier mic that captures rich, broadcast-quality sound into USB-C port of iPhone 15, Android Smartphones or Tablets, newer iPads & Computers, or the USB port of Computers.Features simple plug-and-play operation - just plug in the lavalier to your USB-C or USB device...

We have developed the wireless U300® in-ear monitoring systems for unlimited freedom of movement on the stage with perfect in-ear monitor sound at all times. Developed in Germany, their clear, modern design and straightforward operation make them the perfect choice – not just for beg...

 The VIA5002 is an advanced 2-channel power amplifier which combines high power density with superb audio performance in a lightweight, cost-effective package. Delivering 2 x 2500 watts into 4 ohms or 2 x 1600 watts into 8 ohms, it ideal for powering subwoofers in installations an...

The 6NMB420 is a 44mm voice coil 6.5 inch neodymium midbass transducer designed for mid low frequency reproduction in system designs where high intelligibility is required.

PRO 148 is an active DI specially developed by UNiKA for electric guitar and electric bass. It is equipped with a 260KΩ over-impedance input terminal and a special isolation transformer, which can provide very rich harmonic and overtones for musical instruments.

PRO 248 is a dual channel active DI specially developed by UNiKA for electric guitar and electric bass. It is equipped with a 260KΩ over-impedance input terminal and a special isolation transformer, which can provide very rich harmonic and overtones for musical instruments.

  The PRO 3SP isolated signal splitter is especially suitalbe for distributing LINE signals to 3 different receiving ends, two of which are equipped with isolaton transformers to prevent the potential difference caused by the signals of different power sources from causing...

  PRO BT5 has a built-in standard Qualcomm Bluetooth 5.0 module, the receving distance can reach an astonishing 35 meters, and a built-in independent headphone monitoring output.

  PRO IS2 is a 2-in/2-out signal isolator especially suitable for balanced signal connection of two systems with different power sources in order to prevent leakage and burn out of equipment due to potential differences.

  The PRO MMD Passive DI is ideal for keyboard instruments, electronic drum pads, DJ equipment, and media players. No batteries or +48V power supply are required, and a low distortion transformer is built in. PRO MMD is also specially equipped with 3.5mm TRS and RCA input ...

The PRO ONE Passive DI is ideal for keyboard instruments, electronic drum pads, DJ equipment and media players. No batteries or +48V power supply are required, and a low di...

The PRO TWO dual channel passive DI is ideal for keyboard instruments, electronic drum pads, DJ equipment and media players. No batteries or +48V power supply are required,...

  PRO USB is the world’s first high-end decoder DI that uses a USB-C input terminal to connect mobile phones and computers. It can not only decode lossless music, but also read DSD format streaming music formats.

  The UNiKA SDI-1 is an easy-to-use, single-channel, passive direct box for musical instrument and audio system applications. In addition to a high-quality audio transformer, the SDI-1 has some very useful built-in features. So please take a few minutes to go through this ...

  The UNiKA SDI-2 is an easy-to-use, dual-channel, passive direct box for musical instrument and audio system applications. In addition to a high-quality audio transformer, the SDI-2 has some very useful built-in features. So please take a few minutes to go through this us...

  The ISO-2 is a passive audio isolator designed to be inserted into the signal chain to block hum and buzz caused by ground loops. The ISO-2 accepts unbalanced or balanced signals and is equally suitable for consumer electronics and professional line-level devices.

  The NBB Series products are professional audio receiver and/or transmitter to send and/or receive audio datastream to/from the Dante network. The NBB-0202 audio transceiver receives a couples of channels of analog audio and converts them intoDant...

  The NBB-04R receives 4 channels of analog audio and converts them into Dante networked audio stream which in turn can be received by other Dante-enabled devices such as digital audio console or DAW; While the NBB-04T, in contrast, transmits 4 channels of analog audio con...

  The NBB Series products are professional audio receiver and/or transmitter to send and/or receive audio datastream to/from the Dante network. The NBB Series products come with the following variation,

  SPT-3rt is the best tools of UNiKA Stage Series. This tool is suitable for any speaker manufacturer, touring and fixed installation applications. It can be used for testing phase either speaker or balance cable. An external microphone input socket can be connected extern...