The 15MB606 high output mid bass has been designed for use as a bass and low-midrange driver in tuned reflex enclosures, in 2-way systems. It combines high sensitivity (101dB 1W/1m) with high power handling capability. The smooth textured curvilinear paper cone, in conjunction with the viscose...

The 15MB700 very high output mid-bass transducer shows exceptional efficiency and is primarily intended for 2-way very compact reflex systems (75 lt.), 3-way systems and horn loaded applications. It combines high sensitivity (103 dB 1W/1m) with a high power handling capability. The smooth text...

The 15W500 is a fine example of a high quality transducer providing the right balance between performance and engineering costs. This ferrite low frequency driver satisfies the demand for a 15" loudspeaker which combines excellent linearity with good sensitivity and power handling characterist...

LF Ferrite Driver 8 Ohm99 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 450 W AES power handling Weather protected cone and plates for outdoor usage Excellent transient response Improved heat dissipation via uniq...

The 15W750 low frequency transducer meets the specific market demand for a loudspeaker which combines good linearity and efficiency with high power handling capabilities, containing a 75 mm Ø aluminum voice coil. Although primarily intended for use in tuned reflex enclosures, the versat...

99 dB SPL 1W / 1m average sensitivity100 mm (4 in) Interleaved Sandwich Voice coil (ISV)1400W AES power handlingDouble Silicon Spider (DSS) for improved excursion control and linearityDouble Demodulating Rings (DDR) for lower distortionImproved heat dissipation vi...

The 6ND410 is a very high output, state-of-the-art midrange product for high quality professional use. The high level of sound quality has been achieved thanks to extensive research by Eighteen Sound engineers which focused on implementing mid frequencies intelligibility. The 6ND410 can be use...

This1400 watt 8ohm recone kit voice coil is made from hi temp copper and is resin coated to resist coil slipping .The long throw ribbed cone is same as original with 75% tin thinsel leads to resist breaking.

Description The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave f...

Description The NSD1424BTN 1.4” exit neodymium high frequency compression driver has been designed for high level sound systems application.This new HF unit uses our proprietary True Piston Motion - TPM - technology, based on a thin film nitride coating deposit over the titanium diaphrag...

Best performance to price 1.4” exit driver on themarket 108 dB 1W/ 1maverage sensitivity 1.4 inch throat exit 2.4 inch edgewound aluminumvoice coil 140Wprogrampower handling Pure Titaniumdiaphragmassembly Proprietary phase plug design HFcoppersleeve forreduced distortion and increased ou...

ALINPActive local input panelIn lots of applications a local input control can be a useful and above all a timesaving product. No complex devices with multiple buttons to control... just plug in and control the volume, nothing more, nothing less!

CHAMP-4 Convection cooled 4-channel power amplifier The CHAMP-4 versatile power amplifier is a part of the revolutionary CHAMP-series of convection cooled power amplifiers what makes this unit m...

The APart CM6T 2-way built-in loudspeaker is “the reference loudspeaker”. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CM6T is equipped with a...

The CMAR5T marine speaker will bring high quality sound, even in the most difficult humid places. In these humid environments the selection of speaker components is limited to just a few, mostly not the best in audiophile performance. However we achieved to solve the material challenge and are...

CMR 608he Apart CMR608 2-way built-in speaker has an excellent HiFi sound and has a rectangular shape. It can be used with every standard HiFi amplifier and is reliable, even at high power use. The speaker comes with a 5” woofer and 1” tweeter.The housing is made of ABS, the speake...

Apart Audio CMX20DT 8" 100V Ceiling Speaker 20/10/5WThe bigger brother of the CM20DT this speaker is 8", with it's sleek design and superb sound quality it is perfect for 100V line and 16 Ohm applications. Expect nothing less from Apart Audio Speakers.

CMX 20 T W/BL/SLVThe APart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 V...

D-ALINPActive local input panel Decora style, whiteIn lots of applications a local input control can be a useful and above all a timesaving product. No complex devices with multiple buttons to control... just plug in and control the volume, nothing more, nothing less!

The H30LT is a powerfull industrial horn loudspeaker with compression driver. This hornspeaker offers you a high sound pressure for speech and the reproduction of alarm signals. Ideal for long-distance and outdoor use. The H30LT is made out of high impact ABS ; supplied with a stainless steal ...