Description The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and...

Stereo Condenser Shotgun Microphone

240W RMS 5 Zone Mixer AmplifierThe TPM series 5 zone mixer amplifiers are 3RU mixer a amplifier featuring 70V,100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4" phone jack and XLR type.2 line inputs by dual RCA type are also provided.The uniqueness of this amp...

50w 2 WAY BASS REFLEX SPEAKER UNITPROJECT 550 5" woofer and 0.75" tweeter passive installation speakers feature a fully adjustable support bracket for easy installation. Connection is via a Euroblock connector 8" and 100V - Recommended Amplifier: 100W RMS Long Term Power...

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.The PROMAXX feature-set is...

5 Zone Mixer Amp with CD player, Mp3, Tuner & Timer 120W RMSThe Three in One series BGM/Paging amplifiers combine 3 music sources with 5 zone amplifier together, which provides an economy solution for small PA applications where background music, zone paging and control is needed.

6-zone PA mono mixing amplifier

The 15W930 low frequency transducer meets the specific market demand for a ceramic version of our industry standard 15ND930 extended low frequency transducer with 75 mm Ø copper edge wound voice coil. Thanks to its versatility, the 15W930 can be used in 2-way compact reflex enclosures w...

One hand microphone stand

The FR-366 Lavalier Microphone Kit from MXL includes two lavalier microphones (the FR-360 omnidirectional mic and the FR-361 cardioid mic), 2 foam windscreens, and 2 clips. Both included mics have integrated FET preamps and require 48-volt ...

Technical specificationsType : Full Range Woofer : 5.25” treated paper cone Impedance : 8 Ohm Transformer Power Tappings : 7,5 - 15 - 30 watt (1.33k - 666.6 - 333.3 Ohm) RMS Power 100V AES Rated : 30 watt Music - Program : 40 watt SPL 1 w/1 m : 101 dB F...

MICPAT 4Type: Table type active multizone paging microphonePolar pattern: Directional, low feedback, electret capsuleFrequency range: 80 Hz - 20 kHzRated output level: 2 V balanced line outputRated output impedance: 50 OhmConnection: bus system accepts...

Type : Table Type Polar Pattern : Uni-directional Frequency Range : 80Hz-12KHz Sensitivity : -70dB@1Khz Rated output impedance : 600 Ohm Switch : 2 push-to-talk buttons Cable type : 2 core + 2 core screened Cable length : 3 m Connector : open wire Material : o...

The 0818MR is a high sensitivity, midrange loudspeaker designed for use in large 3-way systems. Its closed-back chassis simplifies cabinet manufacture, eliminating the need for a separate midrange enclosure.Celestion Truvox 0818MR 8" Raw Frame Speaker Features:

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems.

The Vertus CLA 604 Passive Column Line Array has 6 x 4" custom woofer with 1" voice coil and 4 x 1" dome neodymium tweeter on a waveguide. We recommend a 500W at 8ohm amplifier this speaker will deliver 123dB SPL Designed to work with the CLA 208SA Subs

1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coi

Eminence PX 23K5Designed to work in high-power cabinets, px crossovers are technically superior passive filters available as board-only or complete with fitted hardware for a smart, economical 'factory-fit' finish. Designed and built for Eminence, px crossovers feature